Subtotal: ( items in your basket)
Park Tool BBT-30.3 Bottom Bracket Tool Set for BB30 and PF30
When you buy Park Tool products, you're entering into their heritage. A well respected brand, Park Tool have been making cycling tools since 1963, and every bit of care that went into their tools then, goes in now. Over the years they have managed to perfect their methods and means of production, and what we have at the end is a tool set with a story, history and image.
Park Tool's recently updated Park Tool BBT-30.3 Bottom Bracket Tool Set has a three-step guide for the PF30 & BB30. - T.H
Please check the stock availability notice on your item when placing your order. This item is: Sold out.
You will receive an email to confirm when your item has been sent.
You can also check the status of your order and individual items by accessing My Account details and following the prompts.
Please allow 10 working days from dispatch of your order before notifying us of any late deliveries.
It may be advisable to check with your neighbours to see if a parcel has been left with them, check any outhouses you might have where it may be left if it cannot fit through your letterbox and contact your local sorting office to see if the item has been returned to the depot as undelivered and awaiting collection.
Please see our returns policy.
10 ReviewsSee all reviews
Where reviews refer to foods or cosmetic products, results may vary from person to person. Customer reviews are independent and do not represent the views of The Hut Group.
Lovely little tool did job perfectly, will pay for itself
Recently i bought a new PF30 BB and instead of sending it to a bike shop to replace my current BB i decide to take matters into my own hand after watching how easy it was to remove my BB and replace with a new BB. Since it is about removing my BB shell, i felt it was important enough to have the right tool so as not to damage my BB. It should fit into your PF30 shell easily and push it to the end. Just use a small hammer to push out the BB cup from the other end. The Park tool is well build and it holds the bearing and cup perfectly. It won't even damage the cartridge fixed on the PF30 shell. It will push the cup out together with the bearing. Alittle pricey for a tool that you don't really need to use always. But it works perfectly and is very well made. A home mechanic must have tool dealing PF BB.
As ever from Park this is a great tool. The metal end sits perfectly inside the bearing, the blue plastic guide does a great job of keeping everything square. Excellent tool.
You honestly don't need any more than this. It gets the bearing out a treat with no damage to bike or bearings. It honestly couldn't be simpler and safer. To top it off, buy a 200mm length of m16 threaded rod, 2 x m16 nuts, 2 x m16 washers (£10 the lot from eBay), add the bushings that come with this tool, and hey presto......a bearing press that works as well as a £200 pro tool. Plus, Probikekit are cheap and deliver quickly.
After spending £15 for my LBS to fix the creaking BB30 only for the noise to return within the week it made sense to add another specialist item to my cycling toolbox as it appears it will quickly pay for itself. The blue bit slots nicely into either the bearing still in the BB or the BB shell meaning no issues with lining up the tool when driving out the bearings. The two bits to assist with the reinstallation of the bearings were invaluable too when pressing the bearings back in (using, in my case, a homemade bearing press). Both bearings out, all cleaned, back together, noise gone, job done. Only thing I don't like is the impact on my BB from the side when driving out the bearings. But nothing Park can do about that with this tool.
Excellent. Worked perfectly. It even worked in reverse ( instead of tapping out the far bearing, it hooked into the near bearing and a friend tapped it out the other way ). The reason I wrote this review is because a short length of M20 rod fits perfectly on the cup flanges included with this tool. Excellent to get the bearing back in.
As usual with any park tool I've purchased it works and its made to a very high standard to which it keeps on working
Excellent product does exactly what it needs to do with minimum effort, well packaged to keep it nice. Great having the extra bearing press shims in the kit which ive used on my own home made press.
This tool makes changing pf30 BB's easy. Usual Park Tool quality and easy to use.
The tool does exactly what it is designed to do and is very easy and efficient to use. I have tried a friend's home made one, but this is so much better and requires less effort to knock the bearings out; very reassuring when used on a carbon frame! The only downside is the price that Park Tools always charge, but Probikekit had one on offer so I bought it - no regrets!